Produced from 6061 alloy which has superior strength to weight ratio, rolling on RS steel bearings and with weight of 232g these are the ultimate lightweight performance track hubs!
Comes supplied with lockring (Shimano hollowtec BB fitting) but compatible with any standard 1.29 x 24tpi lockrings.
Brand new, high strength, lightweight 7150-T7 alloy chain ring with innovative aero technology.
To reduce weight, chain rings are often hollowed to reduce weight and maintain the structural integrity to transfer pedalling force. These hollowed out sections cause vast air friction and drag while pedalling.
Lami Flow rings are the Ridea's latest chain ring design that incorporates aerodynamic attributes to reduce the turbulence created by chain ring. This creates a Laminar-Flow that reduces air friction while keeping the light weight and stiffness of the chain ring structure.
Using RIDEA patented bearing technology, the RIDEA bottom brackets are designed to offer low resistance whilst being stiff and direct to provide the best performance when paired with RIDEA 3D Track crank. Great quality at an amazing price.
Using RIDEA patented bearing technology, the RIDEA bottom brackets are designed to offer low resistance whilst being stiff and direct to provide the best performance when paired with RIDEA 3D Track crank. Great quality at an amazing price.
Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.
Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!
Available with 25.4mm clamp (supplied with 22.2 + 23.8mm shims).
Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.
Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!
Available with 25.4mm clamp (supplied with 22.2 + 23.8mm shims).
Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.
Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!
Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.
Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!
The CNC alloy mount that would allow you to fit your Rindow Bullet light to front or rear eyelets. This mount can also be used with the stainless stays to mount the lights to the front or rear brake calipers.
The CNC alloy mount that would allow you to fit your Rindow Bullet light to front or rear eyelets. This mount can also be used with the stainless stays to mount the lights to the front or rear brake calipers.
Rindow Bullet is a stylish and great quality light that will complement any bike. Made in Japan from high quality components it has a sleek aluminium CNC machined body and can be attached onto your handlebars or seat post with rubber strap or mounted above the brake calipers by adding a separate mount and stainless stay (supplied separately).
Front light has 40 lumens and 3 modes (high, low and flash). A USB charge cable is supplied and it will take 2.5hrs to fully recharge. Rindow Bullet will last 3 hours on high, 6 hours on low and over 50 hours on flash mode.
These lights are waterproof (IPX 4) which means that they will be running even in the worst weather conditions.
Rindow Bullet is a stylish and great quality light that will complement any bike. Made in Japan from high quality components it has a sleek aluminium CNC machined body and can be attached onto your handlebars or seat post with rubber strap or mounted above the brake calipers by adding a separate mount and stainless stay (supplied separately).
Front light has 40 lumens and 3 modes (high, low and flash). A USB charge cable is supplied and it will take 2.5hrs to fully recharge. Rindow Bullet will last 3 hours on high, 6 hours on low and over 50 hours on flash mode.
These lights are waterproof (IPX 4) which means that they will be running even in the worst weather conditions.
Rindow Bullet is a stylish and great quality light that will complement any bike. Made in Japan from high quality components it has a sleek aluminium CNC machined body and can be attached onto your handlebars or seat post with rubber strap or mounted above the brake calipers by adding a separate mount and stainless stay (supplied separately).
Front light has 40 lumens and 3 modes (high, low and flash). A USB charge cable is supplied and it will take 2.5hrs to fully recharge. Rindow Bullet will last 3 hours on high, 6 hours on low and over 50 hours on flash mode.
These lights are waterproof (IPX 4) which means that they will be running even in the worst weather conditions.
Rindow Bullet is a stylish and great quality light that will complement any bike. Made in Japan from high quality components it has a sleek aluminium CNC machined body and can be attached onto your handlebars or seat post with rubber strap or mounted above the brake calipers by adding a separate mount and stainless stay (supplied separately).
Front light has 40 lumens and 3 modes (high, low and flash). A USB charge cable is supplied and it will take 2.5hrs to fully recharge. Rindow Bullet will last 3 hours on high, 6 hours on low and over 50 hours on flash mode.
These lights are waterproof (IPX 4) which means that they will be running even in the worst weather conditions.
Combined with CNC mount will allow you to fit your Rindow Bullet light to front or rear brake calipers.
The stainless silver stays come in two different types, straight or bent. Straight stay is recommended for the rear attachment as the light will be mounted at a higher position.
The Ritchey WCS Seatpost Topper Replacement Shaft is for use with select frames with integrated seat tubes. Patented SideBinder one-bolt clamp design facilitates easy installation and adjustment.
One of the lightest in Selle Italia’s range, the Flite Original features padding with differentiated-thickness, meaning there is additional padding in key areas and less in others to reduce the overall weight.
*Please note this product does not come with packaging.
Shroom Astro light set comes with a pair of battery per light that will last up to 40 hours on the flashing mode. These lights are water resistant which means that they will be running even in the worst weather conditions.
Small, compact and beautifully made, the Aura is the new addition to Shroom’s light collection. Fully waterproof, with 8 different light modes and a super bright 80 lumens, the Aura will ensure you’re seen and safe when out and about, whatever the light conditions.
It’s fully charged by a mini USB cable within 90minutes which provides up to 6 hours of lamp time when using the flash mode. It comes with seatpost and clip on (helmet or bag) fittings and a charging cable.
Perfect for an understated ride any time of the day!
Small, compact and beautifully made, the Aura is the new addition to Shroom’s light collection. Fully waterproof, with 6 different light modes and a bright 40 lumens, the Aura will ensure you’re seen and safe when out and about, whatever the light conditions.
It’s fully charged by a mini USB cable within 90minutes which provides up to 6 hours of lamp time when using the flash mode. It comes with seatpost and clip on (helmet or bag) fittings and a charging cable.
Perfect for an understated ride any time of the day!
A CNC machined, 150 lumen CONVEX front light which provides excellent visibility at all angles in front of a rider. It’s lightweight at 48 grams and clips directly to the bars or a front jacket pocket. Charging, via a mini USB, takes around 90 minutes which will, last for 4 hours.
Charging, via a mini USB, takes around 90 minutes which will, last for 4 hours.
CNC machined, super bright (150 lumen front, 40 lumen rear) lights proving excellent visibility. Both are lightweight at 48 grams – the rear has 6 options ensuring that the rider is seen at all times.
Charging, via a mini USB, is quick and easy and takes around 90 minutes.
A CNC machined, 40 lumen rear light which provides maximum visibility from all angles behind the rider. It has 6 output versions – including a red/blue flash – and a super visible Daytime flash mode. It’s lightweight at 48 grams and clips directly to frame or seatpost or onto a pannier.
Charging, via a mini USB, takes around 90 minutes which will, on a fast flash mode, last for up to 7 hours.
Another great and affordable product from the Shroom Components collection. New Shroom road brake calipers are made from forged alloy and have Dual pivot and quick release. Sold separately as front or rear, these brake calipers offer great quality at amazing price.
Another great and affordable product from the Shroom Components collection. New Shroom road brake calipers are made from forged alloy and have Dual pivot and quick release. Sold separately as front or rear, these brake calipers offer great quality at amazing price.
Passionate to quench the thirst for unique fixed components from brands like Aventon, 6KU, Columbus, Fyxation and many others. Our hub, our base and our heart is in the streets of East London, out of which we are set up to supply a great variety of components, wheels and frames to anywhere in the world. Our own brand BLB is a name synonymous with the urban lifestyle and fantastic value for money offering a huge range of products from bikes to gloves, from framesets to pedals, we have everything covered for our riders. With the BLB range you can be as individual as you want without it costing the earth.