Brands

These shirts feature an exploded technical illustration of our MiniMoto brake, as penned by George Retseck. The image is printed in vivid contrasting colours on a dark heather grey tee, and on the back of the shirt you will find a reprint of Paul’s original hand painted signage. These are printed on unisex Tri-Blend Track Shirts from American Apparel.

The Paul Components MiniMoto Brake (black) for use with standard short pull brake levers. Like Motolite and Moto BMX brakes, the MiniMoto is a direct pull cantilever brake. This design is simpler to install than a traditional cantilever brake, and gives the MiniMoto a narrow profile.
Arms of the MiniMoto have been shortened to match the leverage of standard road brake levers, making the MiniMoto compatible with drop bar brake levers with integrated shifters. The short curved arms give plenty of clearance for cyclocross tires or wide fenders. The spring tension is independently adjustable for each arm which means the brake can be precisely centered on the wheel and adjusted for return strength. Narrow Koolstop brake pads with threaded posts are included with the MiniMoto. These all-weather brake pads have spherical washers for pad angle adjustment, and mount to a slot for vertical alignment with the rim.
With a simple pivoting quick release on one arm, it's easy to open the brake to remove a wheel. The cable enters the brake through a barrel adjuster at the top of the curved cable noodle. This adjuster makes it quick and painless to fine-tune the cable tension of the brake without tools.
Like the rest of Paul Components brakes, the MiniMoto has sealed stainless steel bushings in the pivots. These precisely machined bushings are what contact the brake posts of the frame and give the brake arms a smooth surface to pivot on.
All Paul Component brakes are sold individually.

The Paul Components MiniMoto Brake (polished) for use with standard short pull brake levers. Like Motolite and Moto BMX brakes, the MiniMoto is a direct pull cantilever brake. This design is simpler to install than a traditional cantilever brake, and gives the MiniMoto a narrow profile.
Arms of the MiniMoto have been shortened to match the leverage of standard road brake levers, making the MiniMoto compatible with drop bar brake levers with integrated shifters. The short curved arms give plenty of clearance for cyclocross tires or wide fenders. The spring tension is independently adjustable for each arm which means the brake can be precisely centered on the wheel and adjusted for return strength. Narrow Koolstop brake pads with threaded posts are included with the MiniMoto. These all-weather brake pads have spherical washers for pad angle adjustment, and mount to a slot for vertical alignment with the rim.
With a simple pivoting quick release on one arm, it's easy to open the brake to remove a wheel. The cable enters the brake through a barrel adjuster at the top of the curved cable noodle. This adjuster makes it quick and painless to fine-tune the cable tension of the brake without tools.
Like the rest of Paul Components brakes, the MiniMoto has sealed stainless steel bushings in the pivots. These precisely machined bushings are what contact the brake posts of the frame and give the brake arms a smooth surface to pivot on.
All Paul Component brakes are sold individually.

The Paul Components MiniMoto Brake (silver) for use with standard short pull brake levers. Like Motolite and Moto BMX brakes, the MiniMoto is a direct pull cantilever brake. This design is simpler to install than a traditional cantilever brake, and gives the MiniMoto a narrow profile.
Arms of the MiniMoto have been shortened to match the leverage of standard road brake levers, making the MiniMoto compatible with drop bar brake levers with integrated shifters. The short curved arms give plenty of clearance for cyclocross tires or wide fenders. The spring tension is independently adjustable for each arm which means the brake can be precisely centered on the wheel and adjusted for return strength. Narrow Koolstop brake pads with threaded posts are included with the MiniMoto. These all-weather brake pads have spherical washers for pad angle adjustment, and mount to a slot for vertical alignment with the rim.
With a simple pivoting quick release on one arm, it's easy to open the brake to remove a wheel. The cable enters the brake through a barrel adjuster at the top of the curved cable noodle. This adjuster makes it quick and painless to fine-tune the cable tension of the brake without tools.
Like the rest of Paul Components brakes, the MiniMoto has sealed stainless steel bushings in the pivots. These precisely machined bushings are what contact the brake posts of the frame and give the brake arms a smooth surface to pivot on.
All Paul Component brakes are sold individually.

The Paul Components Moon Unit (black) is a classic crescent straddle cable carrier for cantilever and centre pull brakes.

When Paul Components introduced Moon Unit in the nineties, it was one of the first high quality aftermarket cable carriers.

The Moon Unit has a raised boss for the brake cable clamp that makes setup easy and ensures cable security. Machined channels on the face of the Moon Unit hold the cables in place and an 8mm hex on the back allows you to actually put a wrench on it.

All Moon Units are sold as a pair, with one Unit for each of your brakes, front and rear.

The Paul Components Moon Unit is a classic crescent straddle cable carrier for cantilever and centre pull brakes.

When Paul Components introduced Moon Unit in the nineties, it was one of the first high quality aftermarket cable carriers.

The Moon Unit has a raised boss for the brake cable clamp that makes setup easy and ensures cable security. Machined channels on the face of the Moon Unit hold the cables in place and an 8mm hex on the back allows you to actually put a wrench on it.

All Moon Units are sold as a pair, with one Unit for each of your brakes, front and rear.

The Paul Components Moon Unit (silver) is a classic crescent straddle cable carrier for cantilever and centre pull brakes.

When Paul Components introduced Moon Unit in the nineties, it was one of the first high quality aftermarket cable carriers.

The Moon Unit has a raised boss for the brake cable clamp that makes setup easy and ensures cable security. Machined channels on the face of the Moon Unit hold the cables in place and an 8mm hex on the back allows you to actually put a wrench on it.

All Moon Units are sold as a pair, with one Unit for each of your brakes, front and rear.

For those people still running v/linear/direct pull brakes Paul Components offer the Motolite (black). This bike brake has proven itself to be the best of this genre time and time again. High power, excellent modulation and easy to adjust/maintain.
Now all Motolite’s have the capability of running a larger size wheel. In other words the arms allow the pads to travel way up the arm so you could say, run a 650b or 700c wheel on a bike designed for 26”wheels.
All the parts are 100% machined out of the finest quality materials and painstakingly finished and assembled. Like all Paul Components brakes these feature over-sized sealed pivot sleeves machined to a tolerance of plus or minus one thousandths of an inch. And of course independently adjustable square wire springs keep everything snappy and balanced. The quick release mechanism is utterly simple and always reliable. Why doesn't everybody do it like this?
Yes, disk brakes are taking over, but if you want to keep things simple, avoid that inevitable disk noise, or have a classic Ritchey that’s been hanging in the garage since the early 90’s needing a makeover: these are the brakes for you.
All Paul Component brakes are sold individually.

For those people still running v/linear/direct pull brakes Paul Components offer the Motolite (silver). This bike brake has proven itself to be the best of this genre time and time again. High power, excellent modulation and easy to adjust/maintain.
Now all Motolite’s have the capability of running a larger size wheel. In other words the arms allow the pads to travel way up the arm so you could say, run a 650b or 700c wheel on a bike designed for 26”wheels.
All the parts are 100% machined out of the finest quality materials and painstakingly finished and assembled. Like all Paul Components brakes these feature over-sized sealed pivot sleeves machined to a tolerance of plus or minus one thousandths of an inch. And of course independently adjustable square wire springs keep everything snappy and balanced. The quick release mechanism is utterly simple and always reliable. Why doesn't everybody do it like this?
Yes, disk brakes are taking over, but if you want to keep things simple, avoid that inevitable disk noise, or have a classic Ritchey that’s been hanging in the garage since the early 90’s needing a makeover: these are the brakes for you.
All Paul Component brakes are sold individually.

The Paul Components Neo-Retro (black) is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. The arms of the Neo-Retro are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned thanks to the spherical washers on the brake pads' threaded posts.
The long arms give the Neo-Retro lots of mechanical advantage and supreme mud clearance. However, for smaller frames and those with panniers, we will often recommend our narrower Touring Canti brake. Like all of Paul Components brakes, the Neo-Retro has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.
The Neo-Retro stands out with its stopping power, high adjustability, low easy maintenance, and classic looks. The brakes come with their pivots pre-greased and with all necessary hardware. The Moon Unit cable carrier is not included
Please note:These are very powerful brakes and have a tendency to over power thin tubed frames (in any material). For none-too-stout frames and forks we recommend Touring Canti. Also, the arms stick out a lot! For smaller frames, bikes with bags, and people with large feet there can be some interference problems, in which case the Touring Canti might be more appropriate.
All Paul Component brakes are sold individually.

The Paul Components Neo-Retro (polish) is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. The arms of the Neo-Retro are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned thanks to the spherical washers on the brake pads' threaded posts.
The long arms give the Neo-Retro lots of mechanical advantage and supreme mud clearance. However, for smaller frames and those with panniers, we will often recommend our narrower Touring Canti brake. Like all of Paul Components brakes, the Neo-Retro has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.
The Neo-Retro stands out with its stopping power, high adjustability, low easy maintenance, and classic looks. The brakes come with their pivots pre-greased and with all necessary hardware. The Moon Unit cable carrier is not included
Please note:These are very powerful brakes and have a tendency to over power thin tubed frames (in any material). For none-too-stout frames and forks we recommend Touring Canti. Also, the arms stick out a lot! For smaller frames, bikes with bags, and people with large feet there can be some interference problems, in which case the Touring Canti might be more appropriate.
All Paul Component brakes are sold individually.

The Paul Components Neo-Retro (silver) is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. The arms of the Neo-Retro are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned thanks to the spherical washers on the brake pads' threaded posts.
The long arms give the Neo-Retro lots of mechanical advantage and supreme mud clearance. However, for smaller frames and those with panniers, we will often recommend our narrower Touring Canti brake. Like all of Paul Components brakes, the Neo-Retro has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.
The Neo-Retro stands out with its stopping power, high adjustability, low easy maintenance, and classic looks. The brakes come with their pivots pre-greased and with all necessary hardware. The Moon Unit cable carrier is not included
Please note:These are very powerful brakes and have a tendency to over power thin tubed frames (in any material). For none-too-stout frames and forks we recommend Touring Canti. Also, the arms stick out a lot! For smaller frames, bikes with bags, and people with large feet there can be some interference problems, in which case the Touring Canti might be more appropriate.
All Paul Component brakes are sold individually.

Pint Glass featuring the PAUL Logo for your latest mega hipster craft beer.

Pauls’s first product in 1989 was a seat post qr. Then came wheel qr’s. Now they have decided to bring them back with an updated design.

The stainless steel shafts screw into orange 7075 aluminium heads, which are oval putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminium affair for a good balance of ergonomics and weight savings. The nuts have a nice matching o-ring and a thread friction element to keep them in place after the wheels are removed.

Sold individually.

Pauls’s first product in 1989 was a seat post qr. Then came wheel qr’s. Now they have decided to bring them back with an updated design.

The stainless steel shafts screw into orange 7075 aluminium heads, which are oval putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminium affair for a good balance of ergonomics and weight savings. The nuts have a nice matching o-ring and a thread friction element to keep them in place after the wheels are removed.

Sold individually.

Pauls’s first product in 1989 was a seat post qr. Then came wheel qr’s. Now they have decided to bring them back with an updated design.

The stainless steel shafts screw into orange 7075 aluminium heads, which are oval putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminium affair for a good balance of ergonomics and weight savings. The nuts have a nice matching o-ring and a thread friction element to keep them in place after the wheels are removed.

Sold individually.

Pauls’s first product in 1989 was a seat post qr. Then came wheel qr’s. Now they have decided to bring them back with an updated design.

The stainless steel shafts screw into orange 7075 aluminium heads, which are oval putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminium affair for a good balance of ergonomics and weight savings. The nuts have a nice matching o-ring and a thread friction element to keep them in place after the wheels are removed.

Sold individually.

The Paul Components Racer Braze-On Brake (black) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Braze-On Brake (polished) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer braze-on brake (silver) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Front Brake (black) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Front Brake (polished) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Front Brake (silver) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.
Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.
The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.
Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.
All Paul Component brakes are sold individually.

The Paul Components Racer Rear Brake (black) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Rear Brake (polish) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.

The Paul Components Racer Rear Brake (silver) is a centerpull caliper brake with long reach arms and plenty of clearance. Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.
The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.
It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.
The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.
All Paul Component brakes are sold individually.