workshop

Please note, these prices do not include parts & are listed as a guide.

Our minimum hourly labour charge is £50.00

Our minimum non-mechanic labour charge is £6.00 such as fitting grips, pedals, bottle cages, locks, lights

Basic Mechanic fitting £10.00

Bar Tape Fitting (not inc materials)

Cutting Bars to size  (not inc materials)

Fitting bars (road bars from £20 including re-fitting bar tape, shifters & levers)

Fitting of racks, mudguards & baskets

Service 1 £35.00

Frame & Forks checked for damage.

Headset & steering bolts checked & adjusted

Bottom bracket & crankset checked & externally adjusted.

Hubs checked & externally adjusted

Wheel true checked  (not including truing – from £15 extra)

Brakes checked & adjusted

Gears checked & adjusted

Drive greased if necessary

Tyre’s – Checked for wear, pumped to correct pressure

Safety check of all fittings.

Service 2 £55.00

As above but including:

Full removal of drive components (chain, crankset, mechs, sprocket) cleaned, refitted & greased.

Fixed Drive Clean  £20

Chain, crank & sprocket removed, solvent cleaned, refitted & re-greased.

General Maintenance

Puncture Repair (inc tube)     from £13.50

Cable brake adjustment (Inc. cable fitting)       from £15.00 per brake

Brake service Front & Rear from £25.00

Gear adjustment (inc cable fitting)      from £15.00
Wheel true      from £15.00
Spoke replacement & wheel true      from £15.00 + materials
Fitting of accessories (pannier/basket etc)      from £10.00

Fitting & Installation

Headset (including crown racer)       from £25.00

Headset tightening from £10

Bottom Bracket re-grease/replacement     from £25.00  + £10 for correct chain alignment and tension
Crankset       from £12.00

Chain      from £10.00
Sprocket/Freewheel (inc chain tensioning adjustment)       from £10.00
Drive replacement (chain, crankset, sprocket – not inc material)       from £25.00

Frame & Fork Preparation

Face & Ream head tube       from £25.00

Face fork crown       from £15.00

Chase bottom bracket threads    from  £25.00
Chase/cut fork threads  from  £25.00

Ream seat tube (subject to size)       £10.00

Wheel Building

Wheel build labour per wheel      from  £25.00  Snowflake pattern £35.00

Recover old rim/hub from previous build  (subject to quality)   £10.00

Hub Servicing

Replace cartridge bearings (per hub)       £15.00 (not including parts)

Service open bearing hub (per hub)       £15.00 + parts

Bike Build

Including complete frame/fork preparation      from  £80.00